特點
Features
▲ 采用PLC人性化控制操作
▲ 不銹鋼雙層保溫料筒
▲ 熱風循環裝置(避免熱風向外排放造成環境污染和浪費 電能源)
▲ 壓縮式除濕露點達到-40攝氏度以下。比蜂巢式和雙缸 式除濕機節能30%(因不需要冷卻再生風源)
▲ 全自動供料方式，(三機一體)，(二機一體)，(一機一體)
▲ 可解決:表面水紋、熔接痕、銀絲紋、表面縮水、表面光潔度、透明度、強韌度、白點、黑點等！
▲ Adopt PLC humanized control operation
▲ Stainless steel double insulation barrel
▲ The hot air circulating device(avoid hot air outward discharge of polluting the environment and wasting electric energy)
▲ Compression dehumidification dew point temperature reached-40 degrees celsius.Ratio of honeycomb type and double cylinder type dehumidifying machine energy conservation 30% (because it does not need the cooling regenerative air)
▲ Fully automatic feeding means (three machine of an organic whole)， (the second one)，(one machine one)
▲ Can solve:surface water， weld lines， silver marks， surface shrinkage， surface finish， transparency， toughness， white， black and so on!
產品簡介
Introduction
現在，工程塑料的成型工藝正相應于產品質量和生產效率的嚴格要求，追求著高精度，高品質，高效利用，降低成本等的高工藝。
▲“文惠牌除濕干燥機”是能在穩定的低溫露點進行干燥處理，最大限度地發揮樹脂的特性，高效率并為節能型的除濕干燥機。
▲“文惠牌除濕干燥機”不受一切因季節，時間的變化而造成的溫度差的影響，能實現穩定的理想干燥。其原因，使先讓含有濕氣的空氣在除濕功能(干燥劑)下干燥到-40攝氏度以下，再用這樣的干燥空氣使塑膠顆粒干燥的。
循環方式
是通過:完全被密封的送風機→高溫箱→原料料斗，這樣的一系列循環回路讓一定量的空氣進行循環.并在這里一點點地少量注入超過低溫露點的干燥空氣以達到干燥的方式。注入的干燥空氣和相同量的吸潮空氣從料斗排出。
Now， engineering plastic molding process is corresponding to the product quality and production efficiency of the strict requirements， the pursuit of high precision， high quality， efficient utilization， reduce the cost of high technology.
▲ "Wenhui dehumidifying dryer"is in the stable low temperature dew point drying treatment， maximizing the resin properties， high efficiency and energy-saving dehumidifying dryer.
▲ “Wenhui dehumidifying dryer"from all due to season，time changes caused by temperature difference， often can achieve stable ideal drying.Its reason， to let containing moisture air in drying dehumidification function (desiccant) to -40 degrees celsius， then drying air to dry plastic particles.
Circulation mode
Through: completely sealed fan， high temperature box to raw material hopper， such a series of loops have a certain amount of air circulation， and here a little amount of injected over the low temperature dew point dry air drying way to achieve. Injection of dry air and the same amount of moisture absorption of air discharged from the hopper.
使成型品的質量提高
受潮的塑膠顆粒會產生強度和韌性減低的情況。機能部件(透明產品不透明)如有這樣的肉眼難以發現的實質性的缺陷，則是因干燥不充分而導致了加水分解的結果，并且總是成為生產出不合格產品的主要原因。
The molded product quality improvement
Damp plastic particles will have strength and toughness reduced circumstances. Function part (transparent product opaque) such as the naked eye is difficult to find the substantial defects，is not sufficient for drying caused water decomposition results，and always become the production of unqualified products are the main cause of.
做出漂亮的外形
受潮的塑膠顆粒使成型品產生如銀色條紋、氣泡，燒痕，閃光等不良的外觀，致使價格昂貴的塑膠顆粒浪費是一種很大的損失。
Make beautiful appearance
Damp the molding plastic particles such as silver stripe， bubble， burns， flash and other undesirable appearance， cause the price expensive plastic particles waste is a big loss.
使規格精度提高
高機能的部件越精密就越需要讓嚴密的規格精度產品穩定成型，受潮的塑膠顆粒對于規格精度有微秒的影響。
The specifications of precision
High performance parts more precision is required to make strict specifications of precision products stable molding moisture plastic particles for specifications precision microsecond.
金屬模具的維修變得簡單
塑膠顆粒的干燥不夠充分時，容易產生原料的有害氣體。金屬模具的維修頻率增高會影響生產效率。
Metal mold repair becomes simple
Plastic particles of dry enough， easy to produce materials harmful gas， metal mold repair frequency increases will affect the production efficiency.