SANTEST_GYDC-05位移傳感器控制器SANTEST_GYDC-05-Shanghai Hangou  Mechanical And Electrical Equipment Co。，Ltd

  GYDC-05是日本SANTEST公司生產的線性位移傳感器控制器，高精度，高品質，銷售熱線：021-51085161

GYDC-05 controller enables digital output of 1μm resolution and
also analogue output.
Other features are as options，
-Additional analogue output of magnet velocity
-SSI output and incremental output
GYDC-05 controller can be used with:
GYcRS/GYMR5/GYFRS/GYGS/GYPM/GYHR/GYcRP probes.

Specifications

Digital output (position)

Parallel Binary / (Gray code user-configurable) / Negative logic (「1」 at transistor on)
Incremental output (RS422 line drivers) (Option)
SSI output (Option)

Digital output (position)
Resolution

0.01mm/bit (Probe:GYcRS， MR5， FRS)/0.1， 0.05， 0.005， 0.002， 0.001mm/bit
01mm/bit(Probe:GYGS， PM， HR， cRP， KM)/0.01mm/bit(Probe:GYHR)

Analogue output (position) (OUT1)

0-10V / (output current:Max.5mA， load:Min.2kΩ)
4-20mA (oad:Min.500Ω)
Resolution:16bit(1/65536) (Probe:GYcRS， MR5， FRS)
Resolution:0.01%FS (Probe:GYGS， PM， HR， cRP， KM)

Velocity output (OUT2)

±10V or 4-20mA

Alarm output

Open collector　0.1A　30VDC (Cable disconnection and magnet drop)

Power supply

+24VDC±5% ( < 160mA)

Frequency resp.

Std 1kHz (depending on stroke) sampling

Temp drift

±10ppmFS/°C

Operating Temp

0°C-+65°C

Storage Temp

-20°C-+75°C

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Digital output
1:Standard (parallel， negative logic， binary code)
2:Incremental output (250kHz)
5A:SSI asynchronous
5S:SSI synchronous

(2):Resolution
D2:0.1mm
D3:0.05mm
D4:0.01mm (Standard)
D5:0.005mm
D7:0.002mm
D8:0.001mm

(3):Direction of output (toward probe tip)
D:output data increase
R:output data decrease

(4):Probe
RS:GYcRS probe
R5:GYMR5 probe
FS:GYFRS probe
GS:GYGS probe (Resolution 0.1mm(D2) only)
PM:GYPM probe (Resolution 0.1mm(D2) only)
RP:GYcRP probe (Resolution 0.1mm(D2) only